English – Clarion MAX675VDII User Manual

Page 66

MAX675VDII

English

INSTAL

LATIO

MAN

UAL

Installing the Main Unit in a TOYOTA Vehicle

Install by using parts attached to the vehicle. (Screws marked

★ are attached to the vehicle.)

Vehicles other than NISSAN and TOYOTA

In some cases the center panel may require modification. (Trimming, filing, etc.)
●Removing the Main Unit
When the main unit is to be removed, disassemble it in the reverse of the order in “INSTALLING THE
MAIN UNIT” (see page 69).

Note:
*2: Some panel openings are too small for the unit
depending on the vehicle type and model. In
such a case, trim the upper and lower sides of the
panel frame by about 0.5 to 1.5 mm so the unit
can be inserted smoothly.

*3: If a hook on the installation bracket interferes
with the unit, bend and flatten it with a nipper or
similar tool.

* 3

Figure 7

Main Unit

8-Hexagonal screw
(M5

× 8)

Mounting bracket
(1 pair for the left
and right sides)

Center Panel
(

* 2

)

Example 1

Example 3

Example 2

Affix the screws to the

● marks.

Typical Mounting Brackets