How to use the juice extractor, Circuit breaker protection – Panasonic MJ66PR User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HOW TO USE THE JUICE EXTRACTOR
1. Be sure the Clamps are correctly located and locked in
position before using the juice extractor.
2. Place a glass or bowl under the spout.
3. Preparation of fruit and vegetables:
• Cut large fruit and vegetables into smaller sizes so
that they can be easily put into the Feeder Opening.
• Strawberries, bananas, apricots, etc., are not
recommended, as juice will not be thin as other fruits.
4. Plug the power cord into a convenient electrical outlet.
Your juice extractor is ready for use.
5. Press the Switch “ON”. Then put the fruit and vegetables
into Feeder Opening by using the Food Pusher.
6. After using, the Switch must be turned off and plug should
be disconnected.
CIRCUIT BREAKER PROTECTION
When circuit breaker automatically stops motor due to overloading: after a 10 second
interval, switch off. Unplug. Complete the following instructions, then resume operation.
Cut ingredients small enough to fit into feeder opening. Push ingredients into feeder
gently: too much force activates circuit breaker.
_ 4 _