Replacing shaving head components, Caution, Replacing the system outer foil – Panasonic ES7003 User Manual
Page 8: Replacing the inner blades, How to remove the built-in re chargeable battery
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Replacing shaving head
components
It is recom m ended that you replace
the outer foil at least every year and
the inner blade at least every two
years to m aintain your shaver’s cut
ting perform ance.
Replacing the system outer foil
(see fig. 7)
Squeeze the system outer foil re
lease buttons and lift the system
outer foil upward to rem ove it. To in
sert the new system outer foil, press
down until it snaps into place.
Replacing the inner blades
(see fig. 8)
Squeeze the foil fram e release but
tons and lift the foil fram e upward to
rem ove it. Rem ove the inner blades,
one at a tim e, by grasping them firm ly
at both ends and pulling straight
away from the shaver. To insert the
new inner blades, hold the blades,
one at a tim e, at both ends and press
downward until they snap into place.
ATTENTION:
The
product
you
have purchased is powered by a
nickel cadm ium battery which is re
cyclable. At the end of it’s useful
life, under various state and local
laws, it is illegal to dispose of this
battery into your m unicipal waste
stream . Please call 1-800-8-BAT
TERY for inform ation on how to
recycle this battery.
How to remove the built-in re
chargeable battery
(see fig. 9)
The procedure described below is in
tended only for rem oval of the re
chargeable battery for the purpose
of proper disposal.
W ARNING : Do not attem pt to re
place
the
built-in,
rechargeable
batteries yourself for the purpose
of reusing the shaver. This could
result in the risk of fire or electric
shock. Please contact your near
est authorized Panasonic service
center.
1. Rem ove the cap, outer foil fram e
and inner blades.
2. Rem ove the two parts (a), (b) and
two screws (c).
3. Rem ove two screws (d) and bot
tom cover (e).
4. Push the chassis out of the hous
ing.
5. Rem ove the batteries from the
chassis.
Caution
• Do not charge the shaver where the
tem perature is below 0°C (32®F) or
above 40®C (104°F), where it will
be exposed to direct sunlight or a
heal source, or where there is a lot
of m oisture.
•
Use only the included shaver
charging adaptor RE3-80 to charge
the ES7003/ES7002 shaver.
• The supply cord of the charging
8