Operation for dual wake-up system, Alarm time setting – Panasonic RC6088 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operation for Dual Wake-Up System
This set incorporates a dual wake-up any desired wake-up time in the following
system, you can set each alarm time to way.
Alarm time setting
1
Press and hold the alarm 1
(or 2) display/adjust button.
The clock display shows " / c ' u u " .
2
While pressing the alarm 1
(or 2) display/adjust button,
press and hold the time set
buttons until the desired
wake-up time appears on
the clock display.
Make sure the AM or PM setting is
correct.
Release the alarm 1 (or 2)
display/adjust button, and
the present time is restored
on the ciock display.
To make sure of the preset time,
press the alarm 1 (or
Z )
display/adjust
button again.
If the alarm 1 and 2 display/adjust
buttons are pressed at the same time,
the clock display shows the alarm 1
time.
-13-