Caurm, Power cord, On/off switch – Panasonic MC-V6950 User Manual

Page 9: Handle adjustments

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TO OPERATE CLEANER

CAurm

Do not use outlets stove counters Damage to items in the surrounding areas
could {>ccur. Be sure the switch IS in the off position while plugging the cord in

POWER CORD

NOTE To reduce the risk of electrical shock, this vacuum has a polarized plug, (one blade is wider

than the other) This plug will fit In a polarized outlet only one way If the plug does not fit fully in the
outlet, reverse the plug If it still does not fit, contact a qualified electncian to install the proper outlet

DO NOT CHANGE THE PLUG IN ANY WAY

1 Plug the power cord into a 120V outlet

ON/OFF SWITCH

To start the vacuum cleaner, push
the switch on the top of the dust

compartment to the ON position

To stop the vacuum cleaner, push

the switch on the top of the dust
compartment to the OFF position

HANDLE ADJUSTMENTS

The handle may be lowered
to any position required Just
step on the area as indicated

by the illustration and
lower the handle as
desired

1 Upright position

The handle locks in this
position for storage
The handle should
always be in an

upnght position when

the cleaning tools
are used

2. Middle position

This position IS for

normal cleaning

3 Low position

This position

IS used for

cleaning
under

furniture

- 9 -