Before use, Parts identification, Charging – Panasonic Wet/Dry Rechargeable Shaver ES364 User Manual
Page 6: For a better shave
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Before use
This Wet/Dry shaver can be used for
wet shaving with shaving lather or for
dry shaving. You can use this water
tight shaver in the shower and clean
it in water. Treat yourself to wet lather
shaves for at least three weeks and
notice the difference. Your Panasonic
WET/DRY shaver requires a little
time to get used to because your skin
and beard need about a month to
adjust to any new shaving method.
Charge the shaver for at least 8 hours
before using it for the first time or
when it has not been in use for more
than six months.
Parts identification
(see fig. 1)
® Protective cap
® Foil frame
© Outer foil
® Inner blade
© Foil frame release button
© On/Off switch
© Switch lock button
© Trimmer
® Trimmer switch
© Charge indicator lamp
© Charging adaptor
Charging
(see fig. 2)
Switch the shaver off and set it firmly
into the charging adaptor. Keep the
adaptor level.
Plug the adaptor into an AC outlet.
The charge indicator lamp will glow
red and it will stay on until the shaver
is removed from the adaptor.
You can fully charge the shaver in 8
hours if it seems to be losing speed.
A full charge will supply enough
power for about 7 shaves (three min
utes per shave for a normal beard).
Before traveling, charge it fully for 8
hours if you will not be taking the
charging adaptor with you.
For a better shave
Put a thin layer of shaving foam on
your face which works as lubricator.
Shaving foam is the most suitable
among many other shaving aids(gel,
soap, cream, etc). Do not put a thick
layer of shaving foam as it becomes
messy. If the shaving head is clogged
with foam, simply rinse it under run
ning water.
Hold the shaver at a right angle (90“)
to your skin (see fig. 3). Depress the
switch lock button and slide the On/
Off switch upward to turn the shaver
on. Start out shaving by applying
gentle pressure to your face. Stretch
your skin with your free hand and
move the shaver back and forth in
the direction of your beard. You may
gently increase the amount of pres
sure as your skin becomes accus
tomed to this shaver. Applying exces
sive pressure does not provide a
closer shave.