Leica Geosystems Leica DISTO plus - Manual - Manual (Page 12)

11 2nd Function level Leica DISTO™ plus 1.0.0 GB
de
GB
fr
it
es
nl
ja
Switching off the BLUETOOTH ®
)
Before switching off the BLUETOOTH ® , always
change to the first function level
Press briefly.
BLUETOOTH ® is switched off,when this icon is
no longer visible
)
If still in the second function level, the
BLUETOOTH ® cannot be swictched off. This is a safety
precaution to prevent an accidential interruption of the
BLUETOOTH
® connection.
Before the Leica DISTO™ plus can be switched off, the
BLUETOOTH
® function has to be switched off.
The direction arrows
D5-Z14
The eigth arrow keys in the lower part of the Leica
DISTO™ plus keyboard are used to input directions
(orthogonal and diagonal) when generating a spatial
drawing.
Trigger a measurement in the usual way (even if the
second level is active, these keys remain functional), the
value appears in the display. Select the arrow key that
corresponds to the direction needed for your spatial
drawing. When this arrow key is pressed, the distance is
transferred according to value and direction to the data
receiver (Pocket PC or PC).
Depending on the software used, the arrow keys can also
control the cursor (e.g. Excel).
Transfer of the measured values
Press the arrow key briefly. A a thin line will be
drawn to scale.
D5-Z15
Confirmation (or deletion) of a trans-
ferred measuring value
D5-Z16