Leica Geosystems Leica DISTO D410 - Manual - Manual (Page 14)

Leica DISTO TM D410 820691 13
EN Functions
Adjusting measuring reference/tripod
1 2 3
Distance is measured from the rear of the
device (standard setting).
Distance is measured from the front of the
device (lock symbol = permanently).
Distance is measured from the tripod
thread permanently.
Distance is measured from a Leica DISTO
Adapter FTA 360 (lock symbol = perma-
nently)
4
Confirm setting.
i
If device is switched off, reference
goes back to standard setting
(rear of the device).
If you use an original Leica DISTO
adapter, the reference does not
need to be adapted to tripod
thread!