Clarion Model RK1 - Manual (Page 15)

12
When you are ready to drive the vehicle:
1. Insert the ignition key and turn
it to the RUN (not the START) po-
sition.
2. Press the brake pedal.
N Noottee:: If the brake pedal is pressed before the key is in the ON posi-
tion, the engine will shut down.
While the vehicle is running during remote engine start operation, the
system will monitor the vehicle and will automatically shut down the
engine if the system receives any of the following shut-down inputs:
z The brake pedal is pressed.
z The hood is opened.
z The shutdown toggle switch is put into the OFF position.
z The pre-programmed run time (12, 24, or 60 minutes) has elapsed.
z Remote button is pressed twice in 3 seconds to start the vehicle.