Dynon Avionics Heated AOA/Pitot Probe - Manual (Page 27)

AOA/Pitot Probe and Heated AOA/Pitot Probe Rev. C 5-1
5. ANGLE OF ATTACK CONFIGURATION AND CALIBRATION
The Dynon Avionics AOA/Pitot Probe / Heated AOA/Pitot Probe is designed solely for use with
Dynon Avionics EFIS units, Dynon Avionics SkyView system, and Advanced Flight Systems AOA
and EFIS products. Installation manuals for all Dynon products can be found at
http://docs.dynonavionics.com . Installation manuals for Advanced Flight Systems products can
be found at http://advanced-flight-systems.com .
After installation of the AOA/Pitot Probe / Heated AOA/Pitot Probe is complete, a calibration
procedure must be performed in flight. Each aircraft, each installation is unique; the AOA
calibration procedure ensures that AOA will be displayed accurately for your airplane’s specific
flight characteristics. Instructions for AOA calibration are contained in the Installation Manual
for Dynon Avionics EFIS units, the Dynon Avionics SkyView System Installation Guide, and
manuals for Advanced Flight Systems products.
Similarly, options for configuring the display of the on-screen AOA indicator, optional AOA
audio warnings, and other settings related to AOA vary by product and version of firmware
installed on your system – see the Installation manual for configuration details related to AOA.