Dynon Avionics Remote Compass - Manual (Page 3)

EDC-D10 Installation and Calibration 3
This completes the EDC-D10 calibration process. The process can be repeated as often
as desired. The overall accuracy of the compass depends on the installation location
(away from any ferrous materials or current carrying wires), the installation alignment
(aligned with the EFIS-D10 in pitch, roll, and yaw), and the calibration procedure
(accurately aligning the aircraft with North, East, West, and South and having the correct
magnetic dip angle loaded into the EFIS-D10.) If the compass performance is not
adequate for your usage, we suggest that you investigate each of these factors and try to
optimize your installation for each factor.