Dynon Avionics RV-4/8 Pitch Kit - Manual (Page 9)

DYNON AVIONICS
Servo Mounting Instructions – RV-4/8 Pitch Kit 8
101046-002 Rev F
Mounting Drawings
The following pages provide detailed views of the mounting and assembly of the servo and
this kit. Two sets of diagrams are shown for the assembled kit:
1. All RV-4 fuselages. All RV-8 fuselages built from kits manufactured prior to September
2006.
2. All RV-8 fuselages built from kits manufactured after September 2006.
The bell crank drill location is the same for both kits.
Bell Crank Drill Location