C. Crane WR-2A - Manual (Page 15)

GB
4
Antenna setup for AM reception
The radio comes with built-in AM antenna which should be enough
for normal listening. To improve the AM reception, you may connect
the outdoor AM antenna with AM external antenna terminal (USA
version only).
Operating your radio
Your radio is equipped with three tuning methods – Scan tuning,
manual tuning and Memory preset tuning.
A. Manual tuning
. Press the Power button to turn on your radio.
2. Press the Band button repeatedly to select AM (MW) or FM
waveband.
3. Rotate the Tuning control knob to change the frequency.
B. Scan tuning
. Press the power button to turn on your radio.
2. Select the required waveband by repeatedly pressing the Band
button.
3. Press and hold Tuning control knob, your radio will scan the
selected waveband and stop automatically when it finds a station
of sufficient strength.
4. Set volume control and tone control to the desired setting (volume
and tone control setting will be described later).
5. To switch off your radio, press Power button.