Turning your wifi radio on – C. Crane CWF2WR User Manual
Page 8
Turning Your WiFi Radio On
1. Plug the power adapter cube
into a 120V AC power outlet.
Connect the power adapters
small plug into the jack on the
back of the radio that is labeled
“DC 12V”.
Caution: Only use the power adapter supplied with the radio.
Connecting a power adapter other than the one that was supplied with
your radio could cause permanent damage to the radio and may be
hazardous.
2. After a few seconds the display on the front of the radio will light up
and show “CC WiFi 2” followed by a language selection screen.
3. Rotate the knob labeled
“DIAL/SELECT” to choose your
language. Select your language
by pressing the “DIAL/SELECT”
knob, or by pressing the “OK”
button on the remote control.
Note: Both of the knobs on the front of the radio are buttons also.
They can be rotated or pressed in.
4. Press the “DIAL/SELECT” knob
to confirm “Check Network
When Power On”. This will
insure the best continuous
performance.
Page 8 CC WiFi 2