GiiNii AudioBulb AB-S10 - Manual (Page 4)

6
1. AudioBulb Installation
1. Make sure your wall light power switch is in the“off”position before starting the installation
process.
2. Check your connector type: the AudioBulb speaker is designed to fit into a
connector.
3. With the light switch in OFF position, install the AudioBulbs into the light socket and make sure
it is snugly in place. If the AudioBulb does not fit in your lamp shade, install the harp accessory
(included).
4. Once the bulbs are installed securely, turn on the power switch and wait for few seconds
for the AudioBulbs to light up
standard light socket
.
1.AudioBulb docking station 2. Two AudioBulbs 3. Instruction manual
4. Remote control
10 iPhone/iPod adapters(3x) .
5
WHAT'S IN THE BOX EASY SETUP
6. 3.5mm AUX IN cable(1.5M) 5. AC/DC adapter
9. Docking dust cap 8. Pouch 7. Harp
English English