Cobra Electronics Band Ultra XRS 9745 - Manual (Page 13)

Nothing Comes Close to a Cobra ® 21
Settings
Intro Operation Customer
Assistance Warranty
Notice
Secondary Icons
Your Detector
20 English
Settings
Intro Operation Customer
Assistance Warranty
Notice
Secondary Icons
Your Detector
To Turn VG-2 Detect Mode On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to VG-2 Detect. Tone Visual Display Voice
Two beeps VG2 On VG2 On
One beep VG2 Off VG2 Off
To Turn VG-2 Audio Mode On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to VG-2 Audio. Tone Visual Display Voice
Two beeps VG2 Audio On VG2 Audio On
One beep VG2 Audio Off VG2 Audio Off
VG-2 Detect On
VG2 On
VG-2 Detect Off
VG2 Off
VG-2 Audio On
...Audio On
VG-2 Audio Off
...Audio Off
VG-2 Alert
The detector is undetectable by VG-2 detection devices and will alert you
when such a device is in use near your vehicle. During the alert, the unit
continues to detect other signals. You can choose whether or not you want
your unit to show VG-2 Alerts. With VG-2 Detect mode On, you can also
choose whether or not you want your unit to sound audible VG-2 Alerts.
The factory settings are VG-2 Detect Off and VG-2 Detect Audio Off.
Pop Alert
The Pop Mode Radar Gun is a single-pulse Doppler radar that is a feature
of a K and Ka (Bee III Ka radar gun) band Instant-On radar gun. It uses
a single, short-time pulse to measure the target vehicle’s speed.
The Pop mode receiver senses Pop singles beyond the effective range of
Pop radar guns. As the Pop mode receiver is so sensitive, you should limit
the use of Pop Detect mode to highway and rural driving.
Pop Alert will alert you to Pop radar signals. During the alert, the unit
continues to detect other signals. The factory setting is Pop Detect Off.
To Turn Pop Detect Mode On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to Pop Detect. ToneVisual Display Voice
Two beeps Pop On Pop On
One beep Pop Off Pop Off
To Turn X, K and/or Ku Mode On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to X, K or Ku band. Tone Visual Display Voice
Two beeps X-Band On X On
One beep X-Band Off X Off
Two beeps K-Band On K On
One beep K-Band Off K Off
Two beeps Ku-Band On Ku On
One beep Ku-Band Off Ku Off
Ku-Band On
K u - B a n d O n
Ku-Band Off
K u - B a n d O f f
X-Band Off
X - B a n d O f f
K-Band On
K - B a n d O n
K-Band Off
K - B a n d O f f
X-Band On
X - B a n d On
Pop Detect Off
P o p O f f
Pop Detect On
P o p O n
K, Ku and X Band Detection
The new Ku Band may be introduced to North America in the future. To prevent
false alerts until it is, the factory default for Ku Band detection is Off. In parts of
North America, annoying false alerts from door openers and similar devices are
triggered on the X Band and K Band. If desired, X Band or K Band can be turned
Off. The factory default for X Band and K Band detection is On.