Copy scanner settings, Copy scene, Delete scene – Chauvet DMX-55 DMX User Manual
Page 12: Delete all scenes, Copy bank
Operating Instructions
DMX-55 User Manual
12
2006-01-11 11:59:07
C O PY SC AN N E R S ET T I N G S
This operation allows the user to copy the programming state of one scanner to another. This is
especially useful when both scanners are of the same type.
Action
1)
Hold and maintain the Scanner button
to copy.
2)
Tap another Scanner button to copy
settings into.
Notes
C O PY SC E N E
Action
1)
Press the Program button until the LED
blinks.
2)
Use
BANK and
BANK buttons to
change banks.
3)
Tap the scene to copy within the bank.
4)
Use
BANK and
BANK buttons to
change to another bank if desired.
5)
Tap MIDI/Rec button.
6)
Tap the SCENES button you wish to
copy the scene to.
Notes
D E L ET E S C EN E
Action
1)
Press the Program button until the LED
blinks.
2)
Use
BANK and
BANK buttons to
change banks.
3)
Tap the scene to delete.
4)
Press and hold the Auto/Del button and
tap the scene button you wish to delete.
Notes
All DMX channels for the deleted scene will be set to
0.
D E L ET E AL L SC E N ES
Action
1)
Power off the controller.
2)
Press and hold the Program and BANK
buttons while turning the power back
on.
Notes
C O PY B AN K
Action
1)
Press the Program button until the LED
blinks.
2)
Use
BANK and
BANK buttons to
select the bank to copy.
Notes