Sangean WFR-1D+ (V1) User Manual

Page 39

Preset

Preset allows you to store the most frequent listened stations that

you can select those stations easily and quickly. You can preset up to

10 stations for each Internet Radio, FM and Digital Radio (DAB plus).

To store a preset:

1. Turn to the required band (Internet Radio, FM or Digital Radio

(DAB plus)) and station.

2. Press and hold the required preset button (1 to 10) on the remote

control until the display shows “Preset stored”. The station will be

stored in the chosen preset. Repeat this for the remaining presets

if needed.

To recall a preset:

1. Enter the required band (Internet Radio, FM or Digital Radio

(DAB plus)).

2. Press the required preset button (1 to 10) and your remote control

will then to the station stored in the preset memory. Or Press the

PRESET/STOP button and use the TUNING KNOB to select 1 of

the 10 presets.

Clock Operation

The radio must have the clock/date set to use the alarm functionality.

Clock/Date Setup

1. To setup the time go to > System settings > Time/Date >

Set Time/Date.

2. Use TUNE+/TUNE- or Turning knob to adjust the values and use

FORWARD/BACK to move back and forth between fields.

Press the Turning knob or the button to move back and forth

between fields or confirm.

Time Zone Setup

To setup the time go to > System settings > Time/Date >

Set timezone. Then select the time zone.

Daylight savings Setup

To setup the daylight saving time go to > System settings >

Time/Date > Daylight savings. And then select yes/no for the

daylight savings.

Time/Date Auto Update

Auto update menu allows the user to select whether or not the

time/Date is to be synchronized with the Internet.

To setup the auto update go to > System settings > Time/Date >

Auto update and choose the source of the update.