Sangean DPR-36 (V1) - Manual (Page 6)

5
Charging the radio
The DPR 36 features a built in 800mAHLithium rechargeable battery to power the radio.
Before operating the radio for the first time please fully charge the battery.
The DPR 36 is supplied with a 5V/500 mA AC adaptor.
. Insert the adaptor plug into the DC socket on the right side of your radio. Plug the adaptor
into a standard mains outlet and the radio will begin charging the built in battery. Charging
time is approx. 4 hours with radio off and 0 hours with radio on. The battery power icon on
the LCD display will flash whilst charging and stop flashing when the radio is fully charged.
The battery run time is approx. 5 hours listening through the speaker and approx 8 hours
with headphones. Reduced power, distortion, ‘stuttering’ sounds or battery power indicator in
“low” are all signs that the battery needs to be recharged.
Note:
If charging the radio when the power is off, the battery power icon does not display on
the LCD.