Sangean DCR-10 (R2) - Manual (Page 43)

42
GB
7. Rotate the Tuning control to choose the alarm minute and then
press and release the Select button to enter the minute setting.
Alarm frequency will show on the lower line of the text display.
8. Rotate the Tuning control to select the required option and then
press the Select button to confirm the setting.
Your alarm can be set to the following options:
Once
- will sound once in the next 24 hours only
Daily - will sound everyday
Weekdays- will sound only on weekdays
Weekends- will sound only on weekends
9. Press and release the Select button to select the alarm mode.
Alarm mode will show on the lower line of the text display.
10. Rotate the Tuning control to choose the required alarm mode
and then press the Select button to confirm the setting.
Each alarm can be set to any of the following modes:
DAB+
- will wake you with DAB+ radio
FM - will wake you with FM radio
SD card - will wake you from SD card
iPod - will wake you playing your iPod
BUZZER - will wake you with a buzzer alarm
Note:
If the alarm type selected is iPod/SD card but your iPod/SD card is
not docked or inserted when the alarm is sounding, the buzzer
alarm will be used instead.