Sangean H201 (V1) - Manual (Page 4)

3
LCD Display
Battery Power Status
Volume level
Auto Off status
Short Timer set
Memory number and seconds
Time and Frequency
Band indicator
Installing batteries
1. Position the radio face down on a soft surface.
2. Remove the catch as shown and lift out the battery cover.
3. Insert 2 x “ D “ size/UM-1/LR20 batteries.
4. Replace the battery cover and catch.
5. Reduced power, distortion, a “ stuttering “ sound are all signs that
the batteries may need replacing. The batteries should be
replaced when the battery indicator flashes and E shows in
the display.
6. If the radio is not to be used for any extended period of time,
it is recommended that the batteries are removed from the radio.
A
B
C
D
E
F
G