Sangean U3 (V1) - Manual (Page 17)

6
GB
Aux and Headphones sockets
1. The Aux socket (3.5 mm) on the right side of your radio is for use
with a tape recorder/mini disc or any other equipment that can
provide a line level signal. Inserting a plug into the socket
automatically mutes the internal signal. And Aux LED will be on.
The Volume and Tone control can be used to adjust sound level.
2. The Headphone socket (3.5 mm) located on the right side of your
radio is for use with either headphones or an earphone. Inserting
the headphone plug automatically mutes the internal loudspeaker.
DC out – charge your mobile phone
Note:
Always charge your mobile phone when the radio is switched
off.
Suitable for phones with 3.6 – 4.8 Volt batteries.
Please read instruction manual of your mobile phone.
Connect the suitable charging cable (not supplied) to the DC jack.
Visit mobile phone accessory stores to get suitable charging cable
and plugs.
Light
1. Your radio is fitted with a long life LED light located on the front
of your radio. The light may be switched on and off by gently
pressing the Light button.