Sangean DDR-62 (R1) - Manual (Page 95)

9
GB
Optical S/PDIF output socket
A digital output socket providing an S/PDIF signal is provided on the rear of your radio for
connection to an amplifier, mini-disc or other equipment with a digital optical input. This feature is
not active for iPod or AUX in modes.
Aerial removal
The fitted telescopic aerial is suitable for most applications. The telescopic aerial may be
removed to allow connection to an external aerial using a coaxial cable.
First remove the two small screws holding the antenna connector cover in place (use a small
cross-head screw driver). Then using the spanner (not supplied), remove the telescopic aerial by
rotating
in an anti-clockwise direction when viewed from the rear of the product.
This will expose an F-type connector to which an external aerial may be connected.