Sangean DPR-26BT (V1) - Manual (Page 24)

Bluetooth
Bluetooth
Pairing...
BT connected:
Xperia acro S
1
Listening to Bluetooth music
You need to pair your Bluetooth device with your radio before you can auto-link to play/stream
Bluetooth music through your DPR-6BT. Paring creates a `bond' so two devices can recognize
each other.
Pairing your Bluetooth device for the first time
. Press the Band button to select Bluetooth band. The display will show ‘Bluetooth discoverable’
for a few second followed by ‘Bluetooth Paring.’ The Bluetooth icon ( ) on the panel will flash
to show that the radio is discoverable for pairing.
. Activate Bluetooth on your device according to the device's user manual to link to your DPR-6BT.
With some mobiles (which are equipped with earlier version than BT2.1 Bluetooth device), you
may need to input the pass code “0000”.
. Once connected, the screen should say ‘ BT Connected’ with your Bluetooth device model
shown on the display and the Bluetooth icon will remain lit. You can now play the music in your
Bluetooth-enabled device via DPR-6BT.
Note:
) If there are Bluetooth devices searching for DPR-6BT, it will show its availability on both devices.
However, if one device links with theDPR-26BT first, then the other Bluetooth device won't find
the DPR-6BT on its list.
) If your Bluetooth-enabled device is temporarily disconnected to your DPR-6BT, you need to
manually reconnect your device again to the radio.
) If ‘DPR-6BT’ shows on your Bluetooth device list but your device cannot connect with it, please
delete the Sangean DPR-6BT item from your list and pair the device with DPR-6BT again
following the steps described previously.
4) The effective operation range between the system and the paired device is approximately 0
meters (0 feet).
5) Any obstacle between the system and the device may reduce the operational range.