Sangean U4 DBT (V1) - Manual (Page 25)

4
GB
Scan sensitivity setting - FM
Your radio includes a local/distant option for the auto-scan func-
tion. By setting the radio to the 'local' scan option, weaker signals
from more distant transmitters can be ignored by the radio, making
stronger signals easier to find.
. Press and release the Power button to switch on your radio.
. If needed, press and release the Source button until the FM
band is selected.
3. Press and release the Menu button until the Advanced FM menu
shows on the display.
4. Rotate the Tuning control until ‘FM Scan Zone” 'shows on the
display. Press and release the Tuning control to enter the scan
sensitivity adjustment mode. The current setting will be marked
with an asterisk.
5. Rotate the Tuning control to switch between 'Local' (Strong stations
only) and 'Distant' (All stations) options on the lower line of the
display. The Distant option will allow the radio to find weaker signals
when scanning
6. Press and release the Tuning control to confirm your selection.
The Local or Distant setting is stored in the radio and remains in
force until changed or until a System Reset.