Finding new dab radio stations – Sangean WFR-28C (R2) User Manual

Page 51

Finding new DAB radio stations

Should you wish to use your radio for DAB reception in a new location, or if no stations were
detected during the initial scan, you can follow this procedure to allow your radio to find out which
DAB radio stations are available.

1. Ensure that the telescopic antenna is extended, and then press the

Mode button and rotate

the

Tuning Control Rotary as needed to highlight DAB radio mode. Press the Tuning Control

Rotary to select the option.

2. Once in DAB mode press the

Menu button.

. Rotate the

Tuning Control Rotary until 'Scan' is highlighted on the display.

4. Press the

Tuning Control Rotary to initiate the scan. The display will show 'Scanning' and

your radio will perform a scan of the DAB Band III frequencies. As new stations are found the
station counter will increase and stations will be added to the list. The bar graph indicates the
progress of the scan.

3,4

Station list
Scan
Manual tune
Prune invalid
DRC

DAB

Stations: 24
Scanning

Scan