Sangean U4 (R1) User Manual

Page 11

Note: Duration for charging your battery fully can be varied

according to the mAh capacity of a battery. Higher mAh batteries

required longer charging time.

Important:

Under some conditions the charging LED indicator may switch

off after flashing briefly. This may happen if the batteries are

already freshly charged, or if the radio detects that you may

be attempting to recharge alkaline batteries or mixed different

types or capacity of rechargeable battery. In these cases the

charging will be stopped.

AC operation

Before you plug the AC cord into the AC socket, be sure the

voltage is correct. If you have batteries in the radio and use the

AC power cord, the batteries will automatically be disconnected.

AC cable hook is designed to store the cord when the radio is

not in use.

Important:

The mains adaptor is used as the means of connecting the radio

to the mains supply. The mains socket used for the radio must

remain accessible during normal use. In order to disconnect the

radio from the mains completely, the mains adaptor should be

removed from the mains outlet completely.

3. Powered via DC IN socket

The radio can be also powered via the DC IN socket which can

allow 2Volt DC, which is designed to be powered by the v hicle

or the boat so you can take the radio with you outdoors or on the

boat. An additional cigarette lighter cable is required (not sup-

plied) for this device.

Note: Never use the 2 Volt socket in rainy or moist conditions

to prevent moist from entering the radio. Always keep the rubber

cover on the back well closed under these conditions.