Problem solving – Curtis TC924 User Manual

Page 31

Text mode
Original mode

If after pressing the Talk button, you receive three “beeps” and no dial tone, check

the following:

1. BASE UNIT is plugged into a power source.
2. If you had a power failure or had unplugged the BASE UNIT, replace the

HANDSET on the BASE UNIT for 2 to 5 seconds to reset the system.

NOTE:
If none of the telephones in the house are working, disconnect one set at a time to
verify that none of the phones are causing the problem. If you still have a problem
after doing this, and your telephone still does not work, please contact your local
phone company.

Problem Solving

This manual is related to the following products:

STC924