Cobra Electronics 9 BAND ESD 9270 - Manual (Page 5)

English 4
Installation
Your Detector
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Nothing Comes Close to a Cobra ® 5
Getting Started
Your Detector
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Getting Started
•
1. Place the detector on the dashboard to find a location
where the unit has a clear, level view of the road and is
parallel to the road’s surface. The angle CANNOT be
adjusted after mounting
2. Remove the paper backing
from one side of the hook-
and-loop fastener.
3. Attach the pad to the
dashboard at your chosen
location and remove the
other paper backing.
4. Attach the detector to the
hook-and-loop fastener. You
can remove and
reattach the unit as often
as you like.
5. Plug the power cord into the
detector.
6. Plug the cigarette lighter
adapter on the power
cord into your vehicle’s
cigarette lighter.
Dashboard Mounting
To Turn On The Unit And Adjust The Audio Volume
Rotate the On-Off/
Volume control
clockwise (away
from you).
Audio Visual Display
Three beeps The LED in the lower left
corner of the screen will light
to indicate that the power
is On.
NOTE
In some vehicles, power is supplied to the cigarette
lighter even while the ignition is Off.
If this is the case with your vehicle, you should turn
Off or unplug your detector when parking
for lengthy periods.
Power Indicator Screen
X/K Ka L V/S
l zzz zzzzz