Woo Audio WEE User Manual
Page 6

©2012 WOO AUDIO
tm
Inc. All rights reserved.
www.wooaudio.com
Rev 1.0. May 18, 2012.
6
WARNING: failure to select the correct voltage will result in damage of the amp.
Installing the power cord:
Plug the power cord into the AC inlet. The AC inlet socket is a standard IEC type. You will need
to obtain the correct type for your region.
Installing the source inputs and outputs:
NOTE: A minimum of 3 watts of power amp inputs are recommended or
you will experience sound distortion.
The inputs and outputs are a 5-way speaker binding post.
U.S.
European
U.K.
Switch to label “115” for
AC100 to 125V voltage.
Switch to label “230” for
AC210 to 240V voltage.