Woo Audio WA6 Headphone Amplifier User Manual

Page 10

Inc. All

rights reserved.

www.wooaudio.com

Rev 1.0. June 10, 2011.

Turning the amplifier on:

1. Turn the volume knob to the lowest position.

2. Insert a headphone into headphone output ①.

3. Press the power switch ③ to a locking position. The power LED will light.

4. Observe that all tubes light gradually.

5. Let the tubes warm up for at least 1 minute before turning up the volume.

Front panel diagram:

① Headphone output

② Volume control

③ Power switch

④ Power LED indicator

Break-in period:

It is recommended to allow the amplifier to operate 150+ hours so that peak performance can be

realized. An effective way to break-in the amp is to run the amp normally with music playing.

Please do not leave the amp running continuously.