Break-in period – Woo Audio WA2 Single-ended User Manual

Page 10

www.wooaudio.com

Rev 1.1. May 24, 2012.

Turning the amplifier on:

1. Turn the volume knob to the lowest position.

2. Insert a headphone into phone jack ①.

3. Press the power switch ④ to a locking position. The LED will light.

4. Observe that all tubes light gradually.

5. Let the tubes warm up for at least 1 minute before turning up the volume.

Front panel diagram:

① Headphone output

② Inputs switch for 4 inputs

③ Volume control

④ Power switch

⑤ Power LED indicator

Break-in period:

It is recommended to allow the amplifier to operate 150+ hours so that peak performance can be

realized. An effective way to break-in the amp is to run the amp normally with music playing.

Please do not leave the amp running continuously.