Cambridge Audio DAB500 - Manual (Page 5)

REAR PANEL CONNECTIONS
1. NCT (NATURAL CONTOUR TECHNOLOGY)
Use this switch to select either a flat frequency response or one of two
subtle tone settings; LO or LO/HI.
2. TUNER INPUT
Connect the conventional ‘left’ and ‘right’ (L and R) Audio Outputs of
an existing tuner to the ‘Tuner Input’ using a high quality interconnect.
3. AUDIO OUTPUT
Use high quality interconnect cables from these sockets to any line
level input on your amplifier.
5
4. OPTICAL SPDIF OUTPUT
Use this socket to connect to the input of a separate DAC or digital
recording machine. Use a high quality fibre optic interconnect cable
designed specifically for audio use.
5. PHONO SPDIF OUTPUT
This coaxial output is for input to a separate DAC or digital recording
machine. Use a high quality 75 ohm BNC interconnect cable for this
connection (not one designed for normal audio use).
6. AERIAL SOCKET
Connect the supplied aerial or a separately purchased outdoor aerial
to this F-type socket making sure it is screwed on securely.
1 2 3 4 5
CONNECTIONS
6