Terraillon Petit Poids - Manual (Page 4)

1 2 3 4 5 6
4
Dear Customer, thank you for purchasing this electronic Petit Terraillon baby scale .
We hope you enjoy using the
product. To ensure your complete satisfaction, we recommend
you read these instructions carefully before using it.
Petit Poids Baby Scale
This Petit Terraillon electronic baby scale has been designed based on high quality and safety standards.
Its measurement freeze function means that the weight is displayed, even if the baby keeps moving.
Its highly ergonomic design guarantees comfort and stability, and it can memorise a measurement and calculate
the difference between the current and previous weights.
SPECIFICATIONS
1- Memorisation of weight ( M+ )
2- Recall of memorised weight ( MRC )
3- Weight freeze function ( HOLD )
4- Large 78.5 x 37 mm LCD screen
5- On/Off switch ( ON/OFF )
6- Automatic tare ( TARE )
FEATURES
Maximum weight: 15 kg
Increments: 10 g
Measurement freeze function
Weight memory function
Indicates the difference between the current and previous weights
Automatic tare
Power supply: Two 1.5V AAA batteries, LR03 type (included)
Low battery indicator
OPERATION
1- PUTTING IN THE BATTERY
The appliance uses two
1.5V AAA batteries (LR03 type). Insert the two
1.5V batteries into the battery compartment underneath the baby scale.
Respect the polarities +/-.
2- USE
Press the
ON/OFF button. All the elements on the screen are displayed
for a few seconds, followed by “ 0.00kg ” and the symbol “ ”. When
the symbol “ ” disappears and only “ 0.00kg ” appears on the screen,
place the baby in the cradle.
If your baby keeps still, his/her weight will automatically stabilise after
a few seconds and then appear on the screen.
If your baby is moving, the symbol “
” appears on the left-hand
side of the screen and a non-stabilised weight scrolls on the screen.
Press the
HOLD button to freeze the baby’s weight. The “ ” symbol
is replaced by “ HOLD ”.
The screen displays the baby’s stabilised weight.
When it is not being used, the baby scale automatically switches off
after approximately 20 seconds.
a- Automatic Tare Function
The automatic tare function allows you to weigh your baby comfortably
lying on a towel without including the weight of the towel.
- Switch on the scale by pressing the
ON/OFF button.
- Put the towel on the cradle.
- Press the
TARE button, the screen displays “ --- ” then “ 0.00kg ”.
- Place your baby comfortably on the towel.
Only the baby’s weight is displayed.
(When you remove both the baby and the towel, a negative weight may
appear. This is the corresponding weight of the towel in negative.)
b- Weight memorisation
When the weight of the baby appears on the screen, you can store it
in the memory by pressing the “ ” button, and it will continue to be
displayed for a few seconds. The “
M+ ” symbol appears.
Notice Pese bb petit poids.indd 4 7/10/11 10:34:04