Ryobi D700W - Manual (Page 7)

7 − English
FEATURES
PRODUCT SPECIFICATIONS
No Load Speed .................................................. 1,200/min.
Impacts Per Minute
(IPM) ........................................... 2,100
Net Weight ............................................................... 7.7 lbs.
kNOW YOUR IMPACT WRENCH
See Figure 1, page 11.
The safe use of this product requires an understanding of the
information on the product and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
ANVIL
The square 1/2 in. anvil provides easy installation and
removal of sockets by pushing them on or pulling them off
the anvil.
HANDLE WITH OVERMOLD
Ergonomic handle with overmold improves comfort and
grip.
REPLACEAbLE bRUSHES
Externally accessible brushes extend the life of the tool.
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.
ASSEMbLY
UNPACkING
This product has been shipped completely assembled.

Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACkING LIST
Impact Wrench
Carrying Bag
Operator’s Manual
Input ................................ 120 V, 60 Hz, AC only, 7.5 Amps
Cord Length ..................................................................6 ft.
Torque ...................................................................210 ft. lb.