Clarion AB243R AB243RG - Manual (Page 8)

9
English
AB243R/AB243RG
RDS EON (Enhanced Other Networks)
information
When an RDS station’s EON data is received, EON
is automatically activated. In the traffic announce-
ment standby mode (when the TA mode is on), the
traffic announcement is tuned in, even if it is on a
station other than the one currently tuned in.
* Some countries and radio stations do not broadcast
EON data.
NEWS function
With this function, broadcasts of a specific pro-
gramme type can be tuned in.
Selecting NEWS
1) When you press the NEWS button $, “NEWS”
lights and NEWS appears in the display. The
unit enters the NEWS standby mode.
2) When you press the NEWS button $ again,
cancelling NEWS standby mode.
* The factory setting is “off”
TA (Traffic Announcement) function
With this function, when a traffic announcement
starts, it is tuned in with priority.
Press the TA button #. The “TA” indicator lights
and a traffic announcement broadcast station is
searched for.
To cancel, press the TA button # again. Note,
however, that if the TA button # is pressed while
a traffic announcement is being received, the
traffic announcement is canceled and the traffic
announcement standby mode is set.
* If a traffic announcement broadcast station is found,
the traffic announcement standby mode is set.
* When a traffic announcement starts, “TRA INFO” is
displayed, after which the PS (Programme Service)
name or frequency appears.
* During traffic announcements, the loudness function
is turned off and the radio is automatically set to the
preset volume.
* When the TA button is pressed while tuned to a station
that does not broadcast traffic announcements, a traffic
announcement broadcast station is searched for.
Auto store while “TA” is lit or flashing
If the AS button $ is pressed for more than 2
seconds or longer while the “TA” indicator is lit
or flashing, only traffic announcement broadcast
stations are automatically stored.
RDS (Radio Data System) Operations
Setting the volume for traffic
announcements and emergency
broadcasts
1) Press the TA button # for 2 seconds or
longer.
2) Use the Up/Down buttons 1 to adjust the
volume.
* This volume settings can only be adjusted in the
FM radio mode.