Ryobi HJP002 - Manual (Page 5)

5 - English
SyMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SyMBOL NAME DESIgNATION/EXPLANATION
Safety Alert Indicates a potential personal injury hazard.
V Volts Voltage
min Minutes Time
Direct Current Type or a characteristic of current
no
No Load Speed Rotational speed, at no load
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
Wet Conditions Alert Do not expose to rain or use in damp locations.
Read The Operator’s Manual
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Eye Protection Always wear eye protection marked to comply with ANSI Z87.1.
Li - Ion
Recycle Symbols
This product uses nickel- cadmium (Ni-Cd) and lithium-ion
(Li-ion) batteries. Local, state, or federal laws may prohibit disposal
of batteries in ordinary trash. Consult your local waste authority
for information regarding available recycling and/or disposal
options.
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SyMBOL SIgNAL MEANINg
DANgER:
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
WARNINg:
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
cAUTION:
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
cAUTION:
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.