Ryobi P112 - Manual (Page 5)

5 - English
FEATURES
PRODUCT SPECIFICATIONS
Battery Pack Voltage ..........................................18 Volt DC
Charger Input.................................... 120 V, AC only, 60 Hz
KNOW yOUR CHARGER
See Figure 1, page 8.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
CORD RETAINERS
When not in use, the power cord can be wrapped around
the cord retainers.
KEy HOLE HANGER
The charger has a key hole hanging feature for convenient,
space saving storage. Screws should be installed so that
the center distance is 4-1/8 in.
THERMAL PROTECTION
Battery thermal protection system prevents charging batteries
that are too hot which would cause damage to the battery
and a loss of run-time.
DIAGNOSTIC FEEDBACK
LEDs provide feedback to indicate whether the battery pack
is charging, fully charged, or defective.
Charge Rate ........................................................ 3-6 hours
Cord Length ..................................................................6 ft.
ASSEMBLy
UNPACKING
This product has been shipped completely assembled.

Carefully remove the charger and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
 Inspect the charger carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Charger
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate this
tool until the parts are replaced. Failure to heed this warn-
ing could result in serious personal injury.
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.