Iphone night vision camera adaptor – Night Optics iPhone 4/5 Camera Adaptor Kit (Fits: PVS-7/14) User Manual
Page 2
1
2
3
To remove the rubber eyecup turn the diopter towards the
left side of the scope so that it is fully extended out.
Place the index finger all the way inside the eyecup and
the thumb on the other side and gently lift up over the
retainer ring and pull it off.
Ensure that the threads on the iPhone adaptor ring are
clean and clear of debris.
Thread the adaptor ring into the eyepiece of the weapon
scope. It should be firm, take care not to over-tighten.
Thread the eyepiece ring onto the iPhone adaptor base.
Before fully tightening, position the adaptor at the desired
angle and adjust the locking ring accordingly.
We recommend using landscape mode to maximize the
field of view. Tap the screen to focus the image.
4
Instructions
Fits: 740 | 750 | 760 Weapon Sights
IPHONE NIGHT VISION CAMERA ADAPTOR
Thread on/off
MADE IN THE USA
CAM-IPBWP