Night Optics Adventurer Gen 1+ Dual-Tube Night Vision Binocular User Manual
Page 6
6
OPERATION
WARNING!
Please make sure that the lens
covers are on before switching the
D-212 on in high light conditions.
1. Battery Installation
The D-212 has a common body (1) (fig. 1),
which contains two image intensifiers and the
battery compartment. The lenses (4) (fig. 1) and
the eyepiece assemblies (2) (fig. 1) are joined
by threaded connections.
D-212
D-212
Insert CR123
battery (positive
terminal inside)
Place back the cover
+
+
Remove the
battery
compartment cover
11
MAINTENANCE
Optics
Always clean the optics with a suitable optical
cleaning cloth. Do not use detergents or exces-
sive moisture to clean any part of the Night Vi-
sion Device.
Battery/Battery Compartment
Any Night Vision Device that is to be stored for a
long or undetermined amount of time must have
the batteries removed.
Moisture
The Night Vision Device is water resistant. No
warranties or guarantees apply to a Night Vision
Device that has been submerged in water. Take
great care when using any night vision in a wet
environment as the image intensifier tube is
sensitive to moisture.
Salt Water
If the Night Vision Device is exposed to a salt
water environment, wipe it off with a clean cloth
slightly dampened with fresh water and dry it
thoroughly. Take special care of the optics as
noted above.
Sunlight
Night Vision is sensitive to light and must be
stored away from direct contact with bright light
sources of any kind.
!WARNING!
Improper care or unauthorized
maintenance can damage device
and may result in warranty nullifi-
cation.
6
OPERATION
WARNING!
Please make sure that the lens
covers are on before switching the
D-212 on in high light conditions.
1. Battery Installation
The D-212 has a common body (1) (fig. 1),
which contains two image intensifiers and the
battery compartment. The lenses (4) (fig. 1) and
the eyepiece assemblies (2) (fig. 1) are joined
by threaded connections.
D-212
D-212
Insert CR123
battery (positive
terminal inside)
Place back the cover
+
+
Remove the
battery
compartment cover
11
MAINTENANCE
Optics
Always clean the optics with a suitable optical
cleaning cloth. Do not use detergents or exces-
sive moisture to clean any part of the Night Vi-
sion Device.
Battery/Battery Compartment
Any Night Vision Device that is to be stored for a
long or undetermined amount of time must have
the batteries removed.
Moisture
The Night Vision Device is water resistant. No
warranties or guarantees apply to a Night Vision
Device that has been submerged in water. Take
great care when using any night vision in a wet
environment as the image intensifier tube is
sensitive to moisture.
Salt Water
If the Night Vision Device is exposed to a salt
water environment, wipe it off with a clean cloth
slightly dampened with fresh water and dry it
thoroughly. Take special care of the optics as
noted above.
Sunlight
Night Vision is sensitive to light and must be
stored away from direct contact with bright light
sources of any kind.
!WARNING!
Improper care or unauthorized
maintenance can damage device
and may result in warranty nullifi-
cation.