Native Union Curve Bluetooth User Manual

Page 9

PAIRING AN ADDITIONAL DEVICE

You only need to pair your phone with the MM03 once. Once you have paired your phone with the
MM03 they will reconnect to each other in future without you having to repeat the pairing process. If
you need to pair an additional phone, simply repeat the process “PAIRING THE MM03 HANDSET
WITH YOUR iPHONE”
The MM03 can store pairing information for up to 4 Bluetooth devices. If you pair a fifth device, it will
replace the stored pairing information for the device that has not been connected to the MM03 for
the longest time.

You can connect the MM03 to two Bluetooth devices at the same time. For more information,
please see “USING MORE THAN ONE BLUETOOTH DEVICE AT THE SAME TIME (MULTIPOINT)”

USING MORE THAN ONE BLUETOOTH DEVICE AT THE SAME TIME (MULTIPOINT)

The MM03 supports Multipoint technology. This means that you can connect the MM03 with two
different mobile phones or Bluetooth devices at the same time. If either phone rings, you can answer
it with the MM03.

If I have two phones paired and connected, which one will be used?

When you have two phones connected to the MM03:
• You can answer calls received on either phone with the MM03.
• If you initiate a call through the MM03 (by using the MFB button to either redial the last call or
use your phone’s voice dial feature), then the call will happen on whichever phone is currently
designated as the primary phone. As explained below, this is determined by a combination of
connection order and active calls.

Which phone is the primary phone?

The primary phone is either the phone that is connected to the MM03 most recently or the phone
that had the last active call:
• When your phones connect to the MM03, the one that connects last becomes the primary
phone.
• Every time you have an active call through the MM03 (incoming or outgoing), the phone with
the call becomes the primary phone.
• If both phones go out of range and come back into range together then the primary phone will
be whichever one happens to reconnect last with the MM03.

Setting the Primary Phone

You can force the MM03 to change the primary phone by doing any of the following:
• Answer an incoming call: the phone receiving the call will become the primary phone.
• Initiate a call from one of the phone: the phone making the call will become the primary phone.