Native Union Monocle - Manual (Page 4)

English
CONNECTING
Insert the 3.5mm jack into your device.
COMMUNICATING
Calling: Use your device to dial.
Answering/ending a call: Click the button (1) on your MONOCLE once to answer or end a call.
Volume: Use the volume control function on your device.
SPEAKER / SPEAKERPHONE MODE (DIAGRAM 2)
Turn the speaker/speakerphone mode on: Rotate the wheel until it clicks.
The white LED indicates speaker/speakerphone mode is ‘ON’.
Turn the speaker/speaker mode off: Rotate the wheel until it clicks and the LED turns off.
Volume: Rotate the wheel clockwise or anticlockwise to increase or decrease the volume.
(To ensure the best sound, we recommend setting the volume on your device to maximum).
LISTENING
Listen: Press the button once to play or pause music, alternatively use your device to control manually.
Skip: Double click to skip to the next track.*
Back-track: Triple click to go back a track.*
*not all devices support this function.
DAISY-CHAIN (DIAGRAMS 3 and 4)
Shared private calling/speakerphone:
Link up to 2 MONOCLES together to share your calls either in handset or speakerphone mode.
Insert the 3.5mm jack of the second MONOCLE into the AUX-out of the first MONOCLE
and then use your device to dial.
Speaker: Daisy-chain up to 10 MONOCLES together to create the best shared listening experience
by inserting the 3.5mm jack of the second MONOCLE into the AUX-out of the first MONOCLE
– repeat these steps for up to 10 MONOCLES.
CHARGING
Use the Nylon USB / Micro-USB charging cable (2) to plug your MONOCLE into a USB power source.
For further information on your MONOCLE please refer to the full instruction manual online at www.nativeunion.com.
To prevent possible hearing damage, do not listen at high volume levels for long periods.