myCharge AmpPlus AM30G - Manual (Page 2)

= 0% - 25%
= 26% - 50%
= 51% - 75%
= 76% -100%
CHECKING BATTERY LEVEL
Your AMPPLUS contains high density batteries, allowing for the
powerbank to remain small and powerful for ultimate portability.
To check the battery level, press the power button. The LEDs will
illuminate to show you how much battery life remains – 4 solid LEDs
mean your
AMPPLUS is fully charged and 1 LED means that it’s
almost empty. If you see 1 LED blinking, this means you have less
than 5% remaining and should recharge.
FLASHLIGHT
We wanted to build you a product that multitasks just like you!
Besides being a small, high-powered powerbank for your
on-the-go needs, you can also use the
AMPPLUS for its integrated
LED flashlight. To use the built-in flashlight, press and hold the round
button.
FAQ/TROUBLESHOOTING
Which port recharges my AMPPLUS and which charges my device?
The small micro-USB port is used to recharge your
AMPPLUS
(recharge cable included). The larger USB port is used for charging
your device with your own cable.
Will my AMPPLUS charge any smartphone?
Your
AMPPLUS is fully compatible with virtually all smartphones. The
powerbank will identify which device is connected through its
SmartSense™ technology.
What can I use to recharge my AMPPLUS?
You can recharge your
AMPPLUS by connecting it to any USB port
through the recharging cable provided. For maximum charging
speed connect to a wall USB adapter or car outlet.
What should I do if my device doesn’t charge?
Press the power button of your
AMPPLUS to initiate charging and to
check battery level. It is possible that there is simply not enough
power to charge your device, recharge your
AMPPLUS if needed.
If your device still isn’t charging, check that the charging cable is
properly connected to the USB port and to your device.
What should I do if all 4 LEDS are flashing?
If your powerbank is recharging, this is normal. If you see all 4 LEDs
flash for 10 seconds, the device connected draws more power than
the
AMPPLUS can give (max 1.0A) and the USB port will shut off.
Why are some LEDs solid and some flashing when I recharge the
AMPPLUS?
The solid LEDs tell you how much the powerbank is currently
charged, while the flashing LEDs indicate how much is left to
charge. Your
AMPPLUS is fully charged when all 4 LEDs are solid.
Can I charge my device and the AMPPLUS at the same time?
Yes! The
AMPPLUS has pass-through charging technology, which
means you can simultaneously charge your device alongside the
AMPPLUS rather than charging each separately.
How many charge cycles do I get with the AMPPLUS?
From empty to full, the
AMPPLUS is capable of recharging at least
500 times! Count on your myCharge to keep you going.
myCharge AMPPLUS Manual
AMPPLUS Manual
WARRANTY INFORMATION
We are dedicated to making the highest quality products possible.
In that, we provide a one-year limited warranty from the date of
purchase. Keep a copy of your purchase receipt as proof of
purchase and register your product at mycharge.com to activate
it and check for the latest product updates as they develop.
Failure to register your product and/or to provide proof of
purchase may void the warranty.
RFA Brands, LLC sells its products with the intent that they are free
of defects in manufacture and workmanship for a period of one
year from the date of original purchase, except as noted in our
policy. RFA Brands, LLC warrants that its products will be free of
defects in material and workmanship under normal use and
service. This warranty extends only to consumers and does not
extend to Retailers.
To obtain warranty service on your product, please visit
mycharge.com/pages/support
THANK YOU FOR CHOOSING MYCHARGE
>
Click here for our warranty & legal information:
mycharge.com/pages/warranty
WARRANTY & LEGAL