Magnum Dynalab MD-106T - Manual (Page 14)

- 14 -
PRODUCT SPECIFICATIONS
Usable sensitivity- Mono –
0.7 uV 9.0 dBf
50 dB quieting – Mono – 2.0 uV 9.9 dBf
50 dB quieting – Stereo – 2.3 uV 25.0 dBf
Capture ratio – 1.5 dB
Image rejection – 110.0 dB
Signal to noise ratio – 80.0 dB
Alternate channel – Wide – 40.0 dB
Alternate channel – Narrow - 70.0 dB
Adjacent channel – Wide – 3.0 dB
Adjacent channel – Narrow - 35.0 dB
THD – Mono – 0.10 %
THD – Stereo – 0.18 %
Stereo separation – 50.0 dB
AM suppression – 70.0 dB
SCA rejection – 80.0 dB
IF rejection – 80.0 dB
19 KHz and 38 KHz component rejection – 75.0 dB
Audio frequency response (+/- 1 dB) – 15 Hz – 17 KHz
Balanced audio output (600 ohms) 2.2 V
Line audio output (RCA) – 1.0 V
Line power (Must be specified) –
110/220/230/240-
VAC
Dimensions (inches H.W.D.) – 4 x 19 x 15
Dimensions (cm H.W.D.) – 11.43 x 48.3 x 38.1
Weight (lbs./kgs) - 18/7.96
Power consumption (Typ/Max) - 50w/100w
TUBE SPECIFICATIONS
Filament current (max) 330 mA
(min) 270 mA
Anode current (1) (max) 1.07 mA (min) 0.92 mA
Anode current (2) (max) 1.07 mA (min) 0.92 mA
Total harmonic distortion < 1.8%
Tubes position 1 and 2 MD Reference Silver 6922
Tube ser.# position 1 ________
Tube ser.# position 2 ________
MAGNUM DYNALAB LTD. RESERVES THE RIGHT TO CHANGE OR MODIFY THE
SPECIFICATIONS WITHOUT FURTHER NOTICE