B&C Technologies B-Computer Programming (HE Series) - Manual (Page 15)

Cycle Segment Charts (continued)
Programming
Details
Use Up or Down to change. Start key is enter or advance
00 or 02 - 30 Segment time: 00 to skip, or any time between 0 and 30 min
HFIL CFIL BFIL Fill temperature: Hot, Cold, or Warm (both fill)
LOLE or HILE Select Fill level, Low or High
SUP0 - SUP7 Select Supply 0-7 (0 for no supply during the step)
00, 75 - 200
00, 25 - 93
SPIN flases for 1 sec
TIME flases for 1 sec
02 - 10
Select time for spin: 2 to 10 minutes
Note: Heat is only available if enabled in Setup
Enter temperature: 75-200 deg F, 25-93 deg C. 00 for no heat.
Select 00 if you have programmed a Flushing Prewash
Note: Supply 4 and 7 are only availble if enabled in Setup
Fill 6 Segment
Display
fil6
14