Motorola AW 7390 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SAFETY INSTRUCTIONS
Read before operating equipment
This product was designed and manufactured to meet sinct quality and safety standards There are, however,
soma installation and operation precautions which you should be particularly aware of.
1.
Read Instructions - AH the safety and operating
instructions should be read before the appliance
is operated
2.
Retain Instructions • The safety and operating
instructions should be retained for future refer
ence,
3.
Heed Warnings • AH warnings on the appliance
and in the operating instructions should be
adhered to.
4.
Follow Instructions - AH operating and use
Instructions should be followed.
5
Water and Moisture • The appliance should not
be used near water - for example, near a bathtub,
washbowl, kitchen sink, laundry tub. in a wet
basement or near a swimming pool, etc
6
Carts and Stands - TTie appliance should be
used only
With a cart or stand that is recommend
ed by the manufacturer
An
appliance
and
cart
combination
should be moved with care Quick
stops, excessive force, and uneven
surfaces may cause the appliance and
cart combination to overturn
7.
Wall or Ceiling Mounting - The appliance should
be mounted to a wall or ceiling only as recom
mended by the manufacturer
8.
Ventilation - The appliance should be situated so
that Its location or position does not interfere with
itspropervenMation For example, the appliance
should not be situated on a bed. sofa. rug. or
similar surface that may block the ventilation
openings.or,
placed
inabuili-ininstailation.
such
as a bookcase or cabinet that may impede the
flow of air through the ventilation openings
9 Heat • The appliance should be situated away
from heat sources such as radiators, heat
registers, stoves, or other appliances (including
amplifiers) that produce heal
10. Power Sources - The appliance should be
connected to a power supply only of the type
described in the operating instructions or as
marked on the appliance
11. Grounding or Polarization - The precautions that
should be taken so that the grounding or
polarization
means
of
an
appliance
is
not
defeated'
12
Power-Cord Protection - Power supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cords
and plugs, convenience receptacles, and the
point v/here they oxit from tho appliance
13 Cleaning - The appliance should be cleaned only
as recommended by the manufacturer
14 Power Lines > An outdoor antenna should be
located away from power lines
15
Outdoor Antenna Grounding • If an outside
antenna is connected to the receiver, be sure the
antenna system is grounded so as to provide
some protection against voltage surges and built
up static charges
Section 810 of the National Electric Code.
ANSI/NFPA No 70-1984. provides information
With respect to proper grounding of the mast and
supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of
grounding connectors, location of antenna-di
scharge unit, connection to grounding elec
trodes.
and
requirements
for
the
grounding
electrode See Rg A
16 Nonuse Periods - The power cord of the appli
ance should be unplugged from the outlet when
left unused for a long period of time
17 Object and Liquid Entry - Care should be taken
so that objects do not fall and liquids are not
spilled into the enclosure through openings
18
Damage Requiring Service - The appliance
should be serviced by qualified service person
nel when.
A The power-supply cord or the plug has been
damaged, or
В Objects have fallen, or liquid has spilled into
the appliance, or
C The appliance has been exposed to rain, or
D.The appliance does not appear to operate
normally or exhibits a marked change in
performance, or
E The appliance has been dropped, or the
enclosure damaged
19 Servicing -The user should not attempt to сегч'юе
the appliance beyond that described in the
operating instructions AH other servicing should
be referred to qualified se^'lce personnel
FIG.A
EXAMPLE OF ANTENNA GROUNDING
ACCORDING TO THE NATIONAL ELECTRIC CODE INSTRUCTIONS
CONTAINED IN ARTICLE 810 - ’RADIO AND TELEVISION EQUIPMENT
STAND-OFF
INSULATORS®
SERVICE ENTRANCE
EQUIPMENT
POWER SERVICE
GROUNDING ELECTRODE SYSTEM
(og interior metal water pipo)
-ANTENNA
LEAD-IN WIRE
-ANTENNA DISCHARGE
UNIT®
TO EXTERNAL ANTENNA
TERMINALS OF PRODUCT
OPTIONAL ANTENNA GROUNDING ELECTRODE
DRIVEN 8 It (2 44 m) INTO THE EARTH
IF REQUIRED BY LOCAL CODES
SEE NEC SECTION 810-21 (0
GROUND WIRE®®
GROUND CLAMPS
® Use No
to
AWG (53 mm^) copper,
No. 8 AWG (8 4 mm^) aluminum.
No 17 AWG (10 mm') copper-clad steel or
bronze wire, or larger, ground wire
(® Secure the antenna (ead-in and ground wires to
the house with stand-off insulators spaced from
4-6 feet (1 22-1 83 m) apart
® Mount the antenna discharge unit as close as
possible to where the lead-ln wire enters the
house
(® Use jumper wire not smaller than No 6 AWG
(13 3 mm^) copper, or the equivalent, when a
separate antenna-grounding electrode is used
See NEC Section 810-21 (J)
AC POLARIZED PLUG
NOTE TO THE CATV SYSTEM INSTALLER:
This reminder is provided to can the CATV system installer's attention to Article 820-22 of the NEC that provides
guidelines for proper grounding and, m particular, specifies that the cable ground shall bo connected to the
grounding system of the buifdmg. as close to tho point of cable entry as practical