Arning – Bissell ProHeat 2X 9200 SERIES User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
o
A
w
ARNING:
To reduce the risk of
fire, electric shock or
injury unplug from outlet
before servicing.
Built-in Heater Ready Light does not illuminate.
Possible Causes:
Remedies:
O The Heater Switch is not turned ON
(
1
)
0
Turn the Heater Switch ON
(
1
).
0
The Power Switch is not turned ON
(
1
)
. 0
Both switches must be ON
(
1
)
to
activate the Heater Ready Light.
Reduced Spray or No Spray.
Possible Causes:
Remedies: ^ ^
^ ^ ^
^ ^ ^ ^
O Water Tank may be empty
O Fill Heavy Duty Bladder with hot
tap water.
0
Formula Tank may be empty
0
Fill Formula Tank with BISSELL Fiber
Cleansing Formula for cleaning.
© Tanks may not be seated completely
© Turn Power OFF
(O).
Remove and
reseat tanks.
O
Pump may have lost prime
O Turn Power OFF
(O)
and then back
ON ( I ) . Wait one minute, then
depress Trigger.
DiltLifter PowerBmshes do not turn
Possible Causes:
O The Brush is off or broken
0
The unit is in the upright position
0
Circuit Breaker may have tripped
Carpet Protector is not spraying
Possible Causes:
O Cartridge is not connected to the tooi
0
Ready Toois Diai on Fioor Setting
© Soiution dogging the Spray Trigger
Remedies:
O
Turn the machine OFF
(O)
and unpiug
from outiet. Foiiow instructions on
page 17.
0
Brushes only rotate when unit is
reclined using the detent pedai.
© Turn the macliine OFF
(O)
and unpiug
from outief. Check to see if foreign
object is caught in brush roii. Remove
object. Plug machine back in to reset
circuit breaker.
Remedies:
O Follow instructions on cartridge to
assure proper fit.
0 Set Ready Tools Dial to Hose
Attachments Setting.
© Soak Applicator Tool only in hot water.
Spray without the cartridge attached
to purge any residual soiution left in
the tool.
: ;
\ '