Cuisinart Grind & Brew 12-Cup Automatic Coffeemaker DGB-625 - Manual (Page 7)

7
PROGRAMMING YOUR
COFFEEMAKER
SETTING THE CLOCK
When the coffeemaker is plugged in, 12:00
will appear until you set the time.
Entering Time Set Mode
Hold down the Hour or Minute button
until the clock begins flashing. Press
either button to select the desired
time. Hold buttons down to scroll
through the digits, or press and
release to advance one digit at a time.
When scrolling, the numbers will
advance slowly and then speed up.
When the number displayed approaches
the desired time, press and release to
advance one digit at a time. Be sure the
PM indicator is on if a PM time is desired.
Exiting Time Set Mode
a. Press any function button besides Hour
or Minute to exit mode.
b. If you do nothing for a period of five
seconds the mode will be exited.
SETTING THE PROGRAM TIME
When you press the Program set button,
it displays a previously selected auto-on
time, or the default time (12:00pm).
Entering Set Program Time Mode
Press and hold the Program set
button until the green light and LCD
display begin to flash. You are now in
Set Program Time mode. Set the time
you want coffee to begin brewing by
following the instructions in “Entering
Time Set Mode.”
The coffeemaker will start to brew at the
programmed time. The Program mode
cannot be entered if the coffeemaker
is in its brew cycle.
Exiting Set Program Time Mode
a. Press and release Program button.
b. Press any function button besides
Hour or Minute to exit mode and
activate the selected function.
c. If you do nothing for a period of five
seconds the mode will be exited.
SETTING THE AUTO
SHUTOFF TIME
Your coffeemaker can be programmed to
automatically shutoff from 0 to 4 hours after
brewing is complete. The default shutoff time
is 2 hours.
Press and hold the On/Off button to display
current shutoff time. To change the preset
time, press and hold the On/Off button until
the red power light and LCD display begin to
flash. This signals that you have entered the
Set automatic shutoff mode. Set the time
you want coffee to begin brewing by
following the instructions in “Entering Time
Set Mode.”
When the coffeemaker shuts itself off, two
tones will sound.
NOTE: Automatic shutoff may be
programmed either before or during coffee
brewing. If you program the auto shutoff time
after brewing is completed the unit will
automatically account for elapsed time. For
example, if you set the auto shutoff for 40
minutes and 25 minutes have already
elapsed, the unit will shut off automatically
after 15 minutes (40 minutes minus the 25
elapsed equals 15 minutes).
MAKING COFFEE WITH
WHOLE BEANS
Follow instructions in “Before Brewing Your
First Pot of Coffee” above.
1. Insert Charcoal Water Filter
Follow directions for the preparation and
insertion of the charcoal water filter on
page 9.
BEFORE BREWING YOUR
FIRST POT OF COFFEE
We recommend flushing out the system
before brewing your first pot of coffee.
Simply follow “Making Coffee with Pre-
Ground Beans,” page 9. Skip step #1 and
be sure to use only water and a paper
filter…no coffee!
Once you’ve done that, brew a pot of real
coffee and get ready to enjoy Cuisinart at
its best!
GETTING TO KNOW YOUR CONTROL PANEL
(Detailed programming instructions on page 7.)