Zippy R1V2-5275V4H - Manual (Page 3)

1.1 INTRODUCTION
First of all, thank you for purchasing R1V2 Series – High-Density Micro
Redundant power supply for 1U chassis.
The R1V2 is a 1+1, Hot-swappable/Hot-pluggable, High-Density Micro
Redundant power supply set, it consists of:
(1) complete metal frame (nickel-plated)
(2) compact size 1+1 power modules
(3) backplane board
The R1V2 Series of hot swappable high-density micro redundant power supply
offer a maximum 275 watts of output power. The R1V2 series provide Active
Power Factor correction (PFC) at full range AC Input complies with
IEC 1000-3-2/3 for critical applications.
The power unit’s size is compact which smaller than PS II form factor and both
power modules built two interior 40X28 m/m ball bearing DC fans. Each power
module has designed with 2 outputs including +12V & 5VSB circuits and higher
current availability based on Intel ATX12V / EPS12V standards. Total set has
designed with 5 outputs including +12V, +5V, +3.3V, -12V & +5VSB circuits
The unit features a warning sub-system, including LED display, buzzer alarm,
TTL signal, etc., at the same time, it guides user the fast way to find out the
power supply and DC fan Good or Fail optional conditions.
To really discover the power and easy in using these products, we recommend
that you read through this manual carefully.
2