Workrite Sierra Pin Crank Assembly Instructions for 3-leg Workcenters - Manual (Page 5)

Workrite Ergonomics | 800.959.9675 www.workriteergo.com 5
Sierra Pin Workcenters - Assembly Instructions for 2 and 3-leg Tables
Adjust Workcenter Height
For safety and ease of adjustment, set
workcenter height while table is upside down.
Pull Ring Pins from each leg and raise or lower legs
to desired height, then re-insert pins.
5
H
Cleaning instructions
To clean the Sierra legs, simply use plain water and a soft cloth.
Be sure to check legs for even
adjustment before turning the
workcenter back to its upright position.